/*********************************************************************
 *
 *                Microchip USB C18 Firmware Version 1.0
 *
 *********************************************************************
 * FileName:        io_cfg.h
 * Dependencies:    See INCLUDES section below
 * Processor:       PIC18
 * Compiler:        C18 2.30.01+
 * Company:         Microchip Technology, Inc.
 *
 * Software License Agreement
 *
 * The software supplied herewith by Microchip Technology Incorporated
 * (the “Company”) for its PICmicro® Microcontroller is intended and
 * supplied to you, the Company’s customer, for use solely and
 * exclusively on Microchip PICmicro Microcontroller products. The
 * software is owned by the Company and/or its supplier, and is
 * protected under applicable copyright laws. All rights are reserved.
 * Any use in violation of the foregoing restrictions may subject the
 * user to criminal sanctions under applicable laws, as well as to
 * civil liability for the breach of the terms and conditions of this
 * license.
 *
 * THIS SOFTWARE IS PROVIDED IN AN “AS IS” CONDITION. NO WARRANTIES,
 * WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED
 * TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
 * PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT,
 * IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR
 * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
 *
 * Author               Date        Comment
 *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 * Rawin Rojvanit       11/19/04     Original.
 * Brian Schmalz		03/15/06	 Updated for UBW boards.
 ********************************************************************/

/******************************************************************************
 * -io_cfg.h-
 * I/O Configuration File
 * The purpose of this file is to provide a mapping mechanism between
 * pin functions and pin assignments. This provides a layer of abstraction
 * for the firmware code and eases the migration process from one target
 * board design to another.
 *
 *****************************************************************************/

#ifndef IO_CFG_H
#define IO_CFG_H

/** I N C L U D E S *************************************************/
#include "autofiles\usbcfg.h"

/** T R I S *********************************************************/
#define INPUT_PIN           1
#define OUTPUT_PIN          0

/** U S B ***********************************************************/
#define usb_bus_sense       1
#define self_power          1

/** L E D ***********************************************************/
/* On UBW, LED1 = RC0, LED2 = RC1, SW = RC2		 					*/

#define mInitAllLEDs()      LATC &= 0xFC; TRISC &= 0xFC;

#define mLED_1              LATCbits.LATC0
#define mLED_2              LATCbits.LATC1

#define mLED_1_On()         mLED_1 = 1;
#define mLED_2_On()         mLED_2 = 1;

#define mLED_1_Off()        mLED_1 = 0;
#define mLED_2_Off()        mLED_2 = 0;

#define mLED_1_Toggle()     mLED_1 = !mLED_1;
#define mLED_2_Toggle()     mLED_2 = !mLED_2;

/** S W I T C H *****************************************************/
#define mInitSwitch()		TRISCbits.TRISC2 = 1;
#define UserSW				PORTCbits.RC2

#define mLED_Both_Off()     {mLED_1_Off(); mLED_2_Off();}
#define mLED_Both_On()      {mLED_1_On(); mLED_2_On();}
#define mLED_Only_1_On()    {mLED_1_On(); mLED_2_Off();}
#define mLED_Only_2_On()    {mLED_1_Off(); mLED_2_On();}

#endif //IO_CFG_H