/*********************************************************************
 *
 *                Microchip USB C18 Firmware Version 1.0
 *
 *********************************************************************
 * FileName:        usbcfg.h
 * Dependencies:    See INCLUDES section below
 * Processor:       PIC18
 * Compiler:        C18 2.30.01+
 * Company:         Microchip Technology, Inc.
 *
 * Software License Agreement
 *
 * The software supplied herewith by Microchip Technology Incorporated
 * (the “Company”) for its PICmicro® Microcontroller is intended and
 * supplied to you, the Company’s customer, for use solely and
 * exclusively on Microchip PICmicro Microcontroller products. The
 * software is owned by the Company and/or its supplier, and is
 * protected under applicable copyright laws. All rights are reserved.
 * Any use in violation of the foregoing restrictions may subject the
 * user to criminal sanctions under applicable laws, as well as to
 * civil liability for the breach of the terms and conditions of this
 * license.
 *
 * THIS SOFTWARE IS PROVIDED IN AN “AS IS” CONDITION. NO WARRANTIES,
 * WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED
 * TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
 * PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT,
 * IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR
 * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
 *
 ********************************************************************/

#ifndef USBCFG_H
#define USBCFG_H

/** D E F I N I T I O N S *******************************************/
#define EP0_BUFF_SIZE           8   // 8, 16, 32, or 64
#define MAX_NUM_INT             1   // For tracking Alternate Setting

/* Parameter definitions are defined in usbdrv.h */
#define MODE_PP                 _PPBM0
#define UCFG_VAL                _PUEN|_TRINT|_FS|MODE_PP

//#define USE_SELF_POWER_SENSE_IO
//#define USE_USB_BUS_SENSE_IO

/** D E V I C E  C L A S S  U S A G E *******************************/
#define USB_USE_CDC

/*
 * MUID = Microchip USB Class ID
 * Used to identify which of the USB classes owns the current
 * session of control transfer over EP0
 */
#define MUID_NULL               0
#define MUID_USB9               1
#define MUID_HID                2
#define MUID_CDC                3
#define MUID_MSD                4

/** E N D P O I N T S  A L L O C A T I O N **************************/
/*
 * See usbmmap.c for an explanation of how the endpoint allocation works
 */

/* CDC */
#define CDC_COMM_INTF_ID        0x00
#define CDC_COMM_UEP            UEP2
#define CDC_INT_BD_IN           ep2Bi
#define CDC_INT_EP_SIZE         8

#define CDC_DATA_INTF_ID        0x01
#define CDC_DATA_UEP            UEP3
#define CDC_BULK_BD_OUT         ep3Bo
#define CDC_BULK_OUT_EP_SIZE    64
#define CDC_BULK_BD_IN          ep3Bi
#define CDC_BULK_IN_EP_SIZE     64

#define MAX_EP_NUMBER           3           // UEP3

#endif //USBCFG_H